Electric lawn mowers
Corded and cordless versions are available. The market demand for cordless machines is increasing. The modern cordless machine combines the low noise and low maintenance of corded versions with the movement flexibility of petrol equivalents. The typical design of an electric lawn mower has an armature shaft (vertical axis electric motor) on which the cutting blade is mounted through a safety clutch device.

Blower/Vacuums They are used as both a blower and a vacuum -clearing leaves, driveways, etc.	Chain saw A hand-held power saw. The blade is chain driven and is mainly used to cut tree limbs.	Grass shears and hedge  cutters  The operation prin- ciple for both is the same - two metal blades moving in opposite directions.
Grass trimmer This tool uses a fast spinning line (plastic or wire) to trim grass etc.	Power sprayer A tool consisting of a pump providing consis- tent high pressure of water or other liquids.

HCH bearings for garden tools
Since the garden tools are usually working in outdoors, HCH bearings are typically fitted with contact rubber seals on both sides to prevent ingress of dust/grass and grease leakage. Bearings are life lubricated with greases capable of operating at temperatures among -30/+130 °C with dust and water ingression characteristics. An internal radial clearance dependant upon the fitting tolerances - normally ISO CN or C3. In the cordless applications, low friction and good contaminant protection are required. HCH bearings can be fitted with light contact rubber seals together with pressed steel cages. HCH also offer non-contact rubber seals and metal shields when high speed is required in these tools.

HCH bearings for garden tools
Since the garden tools are usually working in outdoors, HCH bearings are typically fitted with contact rubber seals on both sides to prevent ingress of dust/grass and grease leakage. Bearings are life lubricated with greases capable of operating at temperatures among -30/+130 °C with dust and water ingression characteristics. An internal radial clearance dependant upon the fitting tolerances - normally ISO CN or C3. In the cordless applications, low friction and good contaminant protection are required. HCH bearings can be fitted with light contact rubber seals together with pressed steel cages. HCH also offer non-contact rubber seals and metal shields when high speed is required in these tools.